Pool lights
Pool lights and light parts
LED and incandescent pool lights, niches, lenses and transformers, matched to the light you have now. Have a licensed electrician install them.
Two safe first checks
- From outside the water: is the light's switch, timer or automation circuit on, and has its GFCI tripped? Don't reset a GFCI that keeps tripping. Call an electrician.
- Look from the deck: is there water or fog inside the lens?
Still not sure? Show a pool tech on a short video call before you buy, so you only order the part you need.
Which part? Common symptoms
| What you're seeing | Parts often involved |
|---|---|
| Light dead, GFCI OK | Bulb, LED fixture, transformer or switch (electrician) |
| Water or fog inside the lens | Lens gasket or the whole fixture (stay out of the water) |
| Color lights out of sync | Light controller, settings, or one fixture |
| Light trips the GFCI | Fixture, cord or wiring: electrician only, stay out of the water |
Pool lights and light parts we source
LED pool lights
White and color LED lights matched to your niche size, voltage and cord length.
Common sign: Light dead, dim or stuck on one color, or you're upgrading from incandescent.
Incandescent & halogen lights and bulbs
Replacement bulbs and fixtures for older lights.
Common sign: Bulb burned out, or a fixture that's worn out.
Light niches, lenses & gaskets
Niches, lenses, face rings and lens gaskets.
Common sign: Water inside the lens, a cracked lens or a loose face ring.
Above-ground & spa lights
Return-mounted and small lights for above-ground pools and attached spas.
Common sign: Light out, or water in the fixture.
Light transformers & junction boxes
Low-voltage light transformers, junction boxes and light controllers (installed by a licensed electrician).
Common sign: Several lights out at once, or color lights that won't sync.
What to send us
The tag on the light's cord or the label on the fixture (if an electrician has it out), the voltage, the niche size if you know it, and how long the old cord is.
Where to find the model and part numbers
- Lights usually have a tag on the cord or a label on the fixture with the model and voltage.
- Tell us the niche size if you know it, and the cord length the old light had.
- Power off at the breaker. Removing, opening or reinstalling a pool light is a job for a licensed electrician.
Brands we source and help find pool lights and light parts for
- Pentair
- Hayward
- Jandy
Common questions
Can I switch my old pool light to LED?
Often, yes. Many LED replacements are made to fit common niches. Send us the old light's details and we'll match one, and have a licensed electrician install it.
Can I change a pool light bulb myself?
Pool lights sit in the water and are wired to the house's electrical system. The U.S. Consumer Product Safety Commission warns about electrical hazards in and around pools. Have a licensed electrician do it.
Can I return a pool light?
Lights are electrical parts, and electrical parts and special orders can't be returned once ordered. We confirm the match with you before you pay.
Related guides
Electrical safety & pool lights
Tingling, flickering lights or a GFCI that won't reset. Treat it as an emergency.
Read the guideAutomation not responding
Equipment ignoring the controller or app? Check communication and service mode.
Read the guideSources
Brand names are trademarks of their owners. We're an independent parts and support service, not affiliated with, endorsed by or an authorized dealer for any manufacturer. These are brands we source and help find parts for. Availability depends on the part and model, and your quote confirms it.
← All pool parts · Pumps · Filters · Heaters & heat pumps · Salt & chlorinators · Automation & electrical · Cleaners · Plumbing & valves · Covers & liners · Ladders & boards · Feeders & test kits · Troubleshooting guides